Esp32 Core Component

Introduction

Contains startup code, crash handling and additional Esp32-specific support code, including the ESP-IDF SDK.

If you want to tune ESP-IDF to your needs you should run:

make SMING_ARCH=Esp32 sdk-menuconfig

Followed by:

make

Configuration variables

The following variables may need to be changed if tools are installed in a different location, or if multiple versions are installed. By default, the most current version will be used.

ESP32_COMPILER_PATH

Location of xtensa compiler toolchain

ESP32_ULP_PATH

Location of ULP compiler toolchain

ESP32_OPENOCD_PATH

Location of ESP32 version of Open OCD JTAG debugging tools.

ESP32_PYTHON_PATH

Location of ESP-IDF python.

Background

An empty ESP IDF project is built which generates a set of libraries and headers which the framework can then be built against.

The project is located in project/{SMING_SOC}.

The code for this project is copied from sdk/project.

The default configuration settings are obtained from sdk/config and written to project/{SMING_SOC}/sdkconfig.defaults.

When sdk-menuconfig is run, the project/{SMING_SOC}/sdkconfig is modified. This can be reset using make sdk-config-clean.

If custom settings are required for a project then place these in a separate file and set SDK_CUSTOM_CONFIG to the location, relative to the project source root directory.

References

Used by

Environment Variables

SoC support

  • esp32

  • esp32c2

  • esp32c3

  • esp32s2

  • esp32s3